"Our DX1 Line and Viking 5/16" lines compete directly with steel cable."
 
 

Off Road Only

Viking Tops

Kilby Enterprises

Tom Woods Custom Drive Shafts

Tuffy Security

Recovery Gear

Accessories

Bumpers & Skids

Custom Accessories

FAQ

Frequently Asked Questions can be found here. We've listed them for you for your reference and use.

Warranty

Review our product warranty. You'll find instructions on product returns and exchange.

Step-by-Step

Here's helpful instructions on how to splice your new winchline. Get complete instructions here.

Products and Accessories

U-Turn


View U-Turn

Finally-- a bolt-on steering system for Jeep Wranglers from Off Road Only! The strongest, most well engineered extreme duty steering system and it's completely bolt-on! As with all of Off Road Only's products, this system exceeds factory quality and enhances BOTH on and off road performance.

  • A crossover steering design that eliminates steering toe change from suspension height change.

  • 4130 Chromoly heat treated and stress relieved Tie Rod (1.375" dia) and Drag Link (1.25" dia) assemblies. Painted with Rustoleum Silver Hammerite for easy touchup.

  • Custom 1 1/4 hex thread insert bungs that are radially MIG welded, for easy and proper jam nut tightening at each jam nut.

  • A drag link connection at the passenger hub that allows full turning radius lock to lock to match the steering box.

  • A drag link design allows clearance for track bar bracket/sway bar bracket. No bracket trimming is required after you lift your Jeep.

  • Custom hubs that bolt to your original steering knuckles, machined and TIG welded for strength, tapered for tie rod end attachment.

  • Improved steering feel, removing the "Dead Spot" commonly associated with a lifted Jeep steering

  • Minimallized bump steer

  • U-Turn 's compatible with a stock trackbar, Rubicon Express Extreme Duty track bar, Full Traction Drop Bracket and most others that relocate front track bar at the frame end
  • U-Turn requires a stock pitman arm.

  • Designed for TJ's from stock height to 6" of lift. Stock height TJs may have a slight interference during maximum compression, not an issue during articulation.

  • 100% bolt on application for TJ Dana 30/44 front axles with or without ABS

  • 15" Steel wheels with more than 3.75" of backspacing may deliver an interference with the U-Turn Hubs, light grinding may allow fitment, wheel spacers to adjust backspacing optional.

(NOTE: Off Road Only has tested U-Turn on XJ and ZJ models, and found it perform as well as TJ's, XJ's with the RE LA kit see significant improvement over stock inverted Y setup. However, not every lift combination has been tried with the XJ/ZJ platforms, please call and discuss your application before ordering!)



Contact Us

Mailing Address:

P.O. Box 93186
Henderson, NV 89009
U.S.A.

Direct Telephone:

702-373-4744

Fax:

702-436-7144

E-Mail: