|
TJ Gas Tank Skid Plate
Our Gas Tank Skid Plate offers excellent protection for the Jeep TJ. This skid was built from 3/16" steel plate in 3 pieces that were laser cut, formed and welded together. It utilizes the stock mounting locations to keep the installation time to a minimum. You will not use the stock tin shield as part of this skid.
Our TJ skid has been moved to the passenger side by 3/4" to allow for more shock clearance on the driver side and it raises the tank up another 1" for increased clearance over stock setups and even more vs. other skids that go over the stock shield. The rear of the skid has a departure angle built in to aid in sliding over obstacles. The front has a new design allowing 3/4" more differential clearance over the previous design. Four drain holes are incorporated into the design and the factory straps are used to secure the tank to the skid. More material has been removed from the front of the skid to give the track bar more room to cycle.
This skid will fit 1997-2002 TJ's without a body lift with slight modification to the tank straps. 2003 Wranglers will require a 1" body lift due to the new changes.
At 60 lbs each, this skid is no lightweight!
Go here to see the installation instructions
KE-GTSP1-PC Price: CALL FOR PRICING Powder Coated Black
YJ Gas Tank Skid Plate
Built similar to our TJ skid, our YJ skid also uses laser cut 3/16" steel which is formed and welded for complete protection against the elements. This skid does not cover the stock skid, it replaces it. Four drain holes are incorporated into the design and the factory straps are used to secure the tank to the skid. Because of the cross member that sits above the front of the gas tank, this skid cannot be raised to gain more ground clearance. The skid was designed to offer the maximum allowable side and differential clearance.
KE-YJ-GTSP-PC Price: CALL FOR PRICING Powder Coated Black
CJ Gas Tank Skid Plate
Laser cut, formed and welded together for excellent accuracy and great looks. Our CJ skid is cut from 3/16" steel and offers excellent protection against the elements. Four drain holes are incorporated into the design and the factory straps are used to secure the tank to the skid. This skid fits the stock 20 gallon plastic tank only. Because of the cross member that sits above the front of the gas tank, this skid cannot be raised to gain more ground clearance. The skid was designed to offer the maximum allowable side and differential clearance. The drivers side was left tall to deflect heat from the exhaust.
KE-CJ-GTSP-PC Price: CALL FOR PRICING Powder Coated Black
Contact UsMailing Address:
P.O. Box 93186
Henderson, NV 89009
U.S.A.
Direct Telephone:
702-373-4744
Fax:
702-436-7144
E-Mail:
|
